No longer practical to use a simple switch of the DC Motors
Reversing a DC motor can be achieved using a simple switch, as shown the cable, not what it says it has changed, so operation to change the direction of the car in the whole voltage polarity. As the DC motor can draw under the conditions of a more contained, at present, it is a good idea to ensure that your current amplifier, the switch can handle the required load rated DC motor current. It shows a typical hook and the transfer switch as a short-wave display, switch connections, there are six as shown, it will change the DC motor switch, the cable operator’s direction. This simple solution may be to improve the use of three bipolar switch. This will move forward and backward, and OFF control without any additional lines. When the DC current in excess of 8 10 amps, often no longer practical to use a simple switch - which is when a clever device known as the relay using the talking about the rescue!The news from Ningbo Lionball [lion-ball] DC Motors Manufacturer http://www.lionball.net